Lainaus:
Alkuperäinen kirjoittaja Säätäjä_setä
Tässä datalehti
|
Kiitti!
Lainaus:
Alkuperäinen kirjoittaja Säätäjä_setä
Mitä kamaa tuossa VIC kortilla on? Voisi vähän päätellä virtaa ja varmistaa, että on 5V systeemi.
Editiä
Tuossahan on VFD näyttö eli kortilla on myös jokin suurempi jännite. Toimiva vertailuyksikkö helpottaisi hommaa.
|
Laitos on ns ajotietokone, joka näyttää kellon/päivän, alkeelliset huoltovälihälyt, muita varoituksia.
Lainaus:
Alkuperäinen kirjoittaja FSM
The VIC consists of a multi-colored vacuum fluo- rescent display screen with a vehicle outline. The VIC is able to display four functions in a choice of five languages. The display functions include:
• Current time (12 or 24 hour clock), day, and date
• Monitor specific vehicle operating systems and alert the driver of a malfunction in a monitored sys- tem
• Provide service reminders or the distance to the next service interval
• The current transfer case mode of operation. The display language choices include:
• English
• French
• German
• Italian
• Spanish.
The VIC receives input from hard-wired sensors
and over the Chrysler Collision Detection (CCD) data bus network. In response to these inputs the VIC offers a combination of graphic and message displays, and provides requests for audible chime alerts to the body control module on the CCD data bus.
Refer to the owner’s manual for more information on the VIC controls, operation, and setting proce- dures. For diagnosis of the VIC module or the CCD data bus, refer to the proper Body Diagnostic Proce- dures Manual. The VIC module cannot be repaired. If damaged or faulty, the entire module must be replaced.
|
CCD väylää pitkin tulee laatikon ylilämpö, nopeustieto, ovien aukiolo. Erillisillä piuhoilla erilaisia "vika"tiloja kuten vähäinen jäähdytys- tai pissapojan neste, vilkku (alkaa hälyytellä noin kilsan ajon jälkeen), takavalojen rikkoutuminen (erilliseltä modulilta), jakiksen asento. Myös valaistuksen tason säätö.
Tässä
linkissä koko piirilevy ja näyttö. Tässä vielä tarkemmat
kuvat.
Siinäpä olisikin projekti, että ohjaisi tätä jollain modernilla mikrotietokoneella!
CCD väylän tulkkaaminen on
oma haasteensa ja sitten miten tuota näyttöä ohjaillaan ja varmaan tarvitsee oman virtalähteensä.